LIST OF SELECTED PUBLICATIONS :
Research Highlights: “Nanotubes as Mass Sensors”, Nature India, doi: 10.1038/ nindia. 2011.119, Published: 18th August, 2011, Nature Publishing Group, United Kingdom.
Yagnik Patel, Unnati Joshi, Prince Jain, Anand Joshi, Sanketsinh Thakor, Swapnil Parikh, Tribological performance of graphene oxide reinforced PEEK nanocomposites with machine learning approach, Results in Engineering, Volume 24, 2024, 103423, ISSN 2590-1230, https://doi.org/10.1016/j.rineng.2024.103423, Impact factor 6.0.
Atul D Watpade, Sanketsinh Thakor, Prince Jain, Prajna P Mohapatra, Chandan R Vaja, Anand Joshi, Dimple V Shah, Mohammad Tariqul Islam, “Comparative analysis of machine learning models for predicting dielectric properties in MoS2 nanofiller-reinforced epoxy composites” Ain Shams Engineering Journal, Elsevier, 102754, DOI : 10.1016/j.asej.2024.102754, Impact factor 6.0
Bansi Shingala, Piyush Kumar Panchal, Sanketsinh Thakor, Prince Jain, Anand Joshi, Chandan R Vaja, RK Siddharth, VA Rana, “Random Forest Regression Analysis for Estimating Dielectric Properties in Epoxy Composites Doped with Hybrid Nano Fillers”, Journal of Macromolecular Science, Part B. 2024, Taylor & Francis, 1-15, DOI: 10.1080/00222348.2024.2322189, Impact Factor 1.4
Mahendra Singh Rathore, Harshita Verma, Sonal B Akhani, Jaivik Pathak, Unnati Joshi, Anand Y Joshi, Chander Prakash, Kirtanjot Kaur, Ankit Oza, “Photoluminescence and Antibacterial Performance of Sol-Gel Synthesized ZnO Nanoparticles” Materials Advances,2024,Royal Society of Chemistry, DOI : DOI: 10.1039/d3ma01096a, Impact Factor 5.0
Udayan Trivedi, Anand Y Joshi, "Advances in active knee brace technology: A review of Gait analysis, actuation and control applications", Heliyon, 2024, 10,4, E26060, DOI: doi.org/10.1016/j.heliyon.2024.e26060, Impact Factor 4.0
Vijay Patel, Unnati Joshi, Anand Joshi, Blessing Kudzai Matanda, Kamlesh Chauhan, Ankit D Oza, Diana-Petronela Burduhos-Nergis, Dumitru-Doru Burduhos-Nergis, "Multi-Walled Carbon-Nanotube-Reinforced PMMA Nanocomposites: An Experimental Study of Their Friction and Wear Properties", Polymers, 2023, MDPI, 15 (13), 2785, DOI:.10.3390/polym15132785, Impact Factor 5.0
Vijay Patel, Unnati Joshi, Anand Joshi, "Investigating the Effect of Hydroxyl Functionalized MWCNT on the Mechanical Properties of PMMA-Based Polymer Nanocomposites", Current Nanomaterials, 2023, 8 (2), 162-174, DOI:10.2174/2405461507666220516154332
Blessing Kudzai Matanda, Vijay Patel, Bharat Singh, Unnati Joshi, Anand Joshi, Ankit D Oza, Manish Gupta, Sandeep Kumar, "A review on parametric optimization of EDM process for nanocomposites machining: experimental and modeling approach", International Journal on Interactive Design and Manufacturing (IJIDeM), 2023, Springer, DOI:10.1007/s12008-023-01353-1, Impact Factor 2.1.
Saurabh P Shah, Anand Y Joshi, Kamlesh Chauhan, "Evaluating the surface characteristics of Stellite-6 super alloy during end milling using titanium nitride coated binary inserts", Materials Today :Proceedings, 2023, Elsevier, DOI:10.1016/j.matpr.2023.03.643.
Blessing Kudzai Matanda, Vijay Patel, Unnati Joshi, Anand Joshi, Ankit D Oza, Chander Prakash, Rajendra Prasad, "A systematic review on machining of nanocomposite: Present scenario and Future Prospects", International Journal on Interactive Design and Manufacturing (IJIDeM), 2023, Springer, DOI :10.1007/s12008-023-01265-0, Impact Factor 2.1..
Vijay Patel, Unnati Joshi, Anand Joshi, Tarun Kumar Upadhyay, Lamya Ahmed Al-Keridis, Mohd Saeed,"Cytotoxicity Analysis for the Hydroxyl Functionalized MWCNT Reinforced PMMA Nanocomposites in Oral Squamous Carcinoma (KB) Cells", Polymers, 2023, MDPI, 15 (5), 1192, DOI:.10.3390/polym15051192, Impact Factor 5.0
·Saurabh Shah; Anand Joshi; Kamlesh Chauhan; Ankit Oza; Chander Prakash; Raul Duarte, Salgueiral Gomes Campilho; Sanders Kumar, "Feasibility analysis of Machining Cobalt-Chromium alloy (Stellite-6) using TiN coated binary inserts", Materials, 2022, MDPI, 15(20), 7294; DOI: 10.3390/ma15207294, Impact Factor 3.4
·Vijay Patel; Unnati Joshi; Anand Joshi; Ankit D. Oza; Chander Prakash; Emanoil Linul; Raul Duarte Salgueiral Gomes Campilho; Sandeep Kumar; Kuldeep Kumar Saxena, " Strength Evaluation of Functionalized-MWCNT Reinforced Polymer Nanocomposites Synthesized using a Novel Approach", Materials, 2022, MDPI, 15(20), 7263; DOI: 10.3390/ma15207263, Impact Factor 3.4
Ayanesh Y Joshi, Anand Y Joshi, "Multi response optimization of PMEDM of Ti6Al4V using Al2O3 and SiC powder added de-ionized water as dielectric medium using grey relational analysis" SN Applied Sciences, 2021, DOI : 10.1007/s42452-021-04712-3, ISSN : 2523-3971, Springer Publishers, Impact Factor 2.6.
Ayanesh Y Joshi, Anand Y Joshi, “Feasibility Analysis of Powder-Mixed Deionized Water as Dielectric for Machining Ti6Al4V”, Journal of The Institution of Engineers (India): Series C, 2021, DOI: 10.1007/s40032-020-00639-7, ISSN : 2250-0553, Springer Publishers
Bhavik A. Ardeshana, Umang B. Jani, Ajay M. Patel & Anand Y. Joshi, “Investigating the elastic behavior of carbon nanocone reinforced nanocomposites”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234, (14), 2908–2922, SAGE Publishers, DOI : 10.1177/0954406220911074, Impact factor 2.0.
Ayanesh Y Joshi, Anand Y Joshi, " A systematic review on powder mixed electrical discharge machining" Heliyon, 2019, DOI : 10.1016/j.heliyon.2019.e02963 , ISSN : 2405-8440, Elsevier Publishers, Impact factor 4.0.
Bhavik A. Ardeshana, Umang B. Jani, Ajay M. Patel & Anand Y. Joshi, “Characterizing the vibration behavior of double walled carbon nano cones for sensing applications” Materials Technology: Advanced Performance Materials, 2018, 33, (9), ISSN: 1753-5557, Taylor & Francis Publishers, DOI : 10.1080/10667857.2018.1458420, Impact factor 3.846.
Ajay M Patel, Bhavik A Ardeshana, Anand Y Joshi, “Classifying the Impact of Progressively Evacuating Hexagonal Lattices of C-C Bond in DWCNT based Nano Resonators”, Materials Technology: Advanced Performance Materials, 2017, 32, (13), 773-781, DOI:10.1080/10667857.2017.1355952, ISSN: 1753- 5557, Taylor & Francis Publishers, Impact factor 3.1.
Ajay M. Patel, Anand Y. Joshi. "Characterizing the nonlinear behaviour of double walled carbon nanotube based nano mass sensor." Microsystem Technologies, 23 (6), 2017, 1879-1889, DOI:10.1007/s00542- 016-3099-5, Springer Publishers, Impact factor 2.1..
Ajay Patel, Anand Joshi, “Modelling the nonlinear behaviour of double walled carbon nanotube based resonator with curvature factors”, Physica E: Low Dimensional systems & Nanostructures, 84, 2016, 98- 107, DOI :10.1016/j.physe.2016.05.018, Elsevier Publishers, Impact factor 3.3
Ajay M. Patel, Anand Y Joshi, “Influence of Atomic Vacancies on the Dynamic Characteristics of Nanoresonators based on Double Walled Carbon Nanotube”, Physica E: Low Dimensional systems & Nanostructures, 70, (C), 90 – 100, DOI: 10.1016/j.physe.2015.02.016, Elsevier Publishers, Impact factor 3.3.
Ajay M. Patel, Anand Y Joshi, “Detection of biological objects using dynamic characteristics of Double walled carbon nanotubes”, Applied Nanoscience, DOI : 10.1007/s13204-014-0364-8, Springer, Impact factor 3.674
Ajay M. Patel, Anand Y Joshi, “Investigating the Influence of Surface Deviations in Double Wall Carbon Nanotube based Nanomechanical Sensors”, Computational Materials Science, 89, 2014, 157-164, DOI:10.1016/j.commatsci.2014.03.034, Elsevier Publishers, Impact factor 3.3
Ajay M. Patel, Anand Y Joshi, “Effect of waviness on dynamic characteristics of Double walled Carbon Nanotubes”, Nanoscience and Nanotechnology Letters, 6, (1), 2014, 1-9, DOI:10.1166/nnl.2014.1720, American Scientific Publishers, Impact factor 1.2.
Ajay M. Patel, Anand Y Joshi, “Vibration analysis of Double wall Carbon Nanotube based resonators for Zeptogram level mass recognition”, Computational Materials Science, 79, 2013, 230-238, DOI:10.1016/j.commatsci.2013.06.022, Elsevier Publishers,Impact factor 3.3.
Ankit Gupta, Anand Y Joshi, Satish C Sharma, S. P. Harsha, “Dynamic Analysis of Fixed-free Single-walled Carbon Nanotube Based Bio-sensors Due to Various Viruses”, IET- Nanobiotechnology, 6 , (3), 2012, 115 – 121, DOI:10.1049/iet-nbt.2011.0057, Impact factor 1.86.
Anand Y Joshi, Satish C Sharma, S. P. Harsha, Chaotic Response Analysis of Single-Walled Carbon Nanotube Due To Surface Deviations” NANO, 7, (2), 2012, 1250008/1 - 1250008/10, DOI:10.1142/S1793292012500087, World Scientific Press,Impact factor 1.56.
Anand Y Joshi, Satish C Sharma, S. P. Harsha, “Zeptogram scale mass sensing using single walled carbon nanotube based bio sensors”, Sensors & Actuators A. Physical, 168, (2), 2011, 275-280, DOI:10.1016/j.sna.2011.04.031, Elsevier Publishers,Impact factor 4.6.
Anand Y Joshi, S. P. Harsha, Satish C Sharma, “The Effect of Pinhole Defect on Vibration Characteristics of Single Walled Carbon Nanotube”, Physica E: Low Dimensional systems & Nanostructures, 43, (5), 2011, 1040-1045, DOI:10.1016/j.physe.2010.12.011, Elsevier Publishers, Impact factor 3.3.
Anand Y Joshi, S. P. Harsha, Satish C Sharma, “Effect of chirality and atomic vacancies on the dynamics of nano resonator based on SWCNT”, Sensor Review, 31, (1), 2011, 47-57, DOI:10.1108/02602281111099080, Emerald Publishers, Impact factor 1.6.
Anand Y Joshi, S. P. Harsha, Satish C Sharma, “Vibration Signature Analysis of Single Walled Carbon Nanotube Based Nano Mechanical Sensors”, Physica E: Low Dimensional systems & Nanostructures, 42, (8), 2010 2115-2123, DOI:10.1016/j.physe.2010.03.033, Elsevier Publishers, (Cited as one of the Top 25 hottest articles of the Journal for the period January 2011- March 2011, Most cited article of the Journal since 2008),Impact factor 3.3.
SELECTED BOOK CHAPTERS : 04
Authors :Anand Y Joshi, Ajay M Patel
Book Title : Advancing Medicine Through Nanotechnology and Nanomechanics Applications
Chapter : Sensing the Presence and Amount of Microbes Using Double Walled Carbon Nanotubes
Publisher : IGI Global, USA
DOI : 10.4018/978-1-5225-1043-7.ch004
Authors : Purnank Bhatt, Mihir Solanki, Anand Joshi and Vijay Chaudhari
Book Title : Applied Mechatronics and Mechanics System Integration and Design
Chapter : Experimental Investigation and Optimization of Process Parameters in Oblique Machining Process for Hard- to-Cut Materials Using Coated Inserts
Publisher : Apple Academic Press, USA
ISBN: 9781771888899
Authors : Umang B. Jani, Bhavik A.Ardeshana, Ajay M. Patel, and Anand Y. Joshi
Book Title : Mechatronic Systems Design and Solid Materials Methods and Practices
Chapter : Evaluating the Mass Sensing Characteristics of Single-Walled Carbon Nanocones
Publisher : Apple Academic Press, USA
ISBN: 9781771889155
Authors : Anand Y. Joshi, Bhavik A.Ardeshana, Ajay M. Patel, Umang B. Jani
Book Title : Handbook of Polymer and Ceramic Nanotechnology
Chapter : Analyzing the dynamic characteristics of double‑walled carbon nanotube reinforced polymer nanocomposites
Publisher : Springer Nature, Switzerland
ISBN: 978-3-030-10614-0